Provides a Protective Shield against Rust and Corrosion
PJ1 Fast Black Exhaust Paint forms a protective shield against rust and corrosion. It was originally formulated for NASA for use on re-entry spacecraft. As a silica-ceramic hybrid, it moves with the metal as it heats/expands and cools/contracts to give it durability.
- Forms a protective shield against rust and corrosion
- Resists chipping and scratching
- For use on headers and expansion chambers
- Not for use on engines, crankcases, transmissions or radiators
- Temperature Tolerance: Withstands up to 1500 degrees F
- Finish: Flat Black
- MPN: 16-HIT
- Blast, etch or sand to expose bare metal
- Remove all loose debris
- Flush surface with non residue evaporative cleaner such as PJ1 Super Cleaner (MPN: 3-20 or 3-21 (CA compliant)
- Apply paint within 24 hours
- Shake can vigorously for a full minute. Apply 3 or 4 thin even coats. Shake can between coats. More thin coats are better than fewer thick coats.
- Run at idle for 10 minutes
- Cool for 20 minutes
- Run at idle for 20 minutes
- Cool for 20 minutes
- Let paint dry completely
- Heat to 250F/121C for 30 minutes
- Cool for 30 minutes.
- Heat to 400F/204C for 30 minutes
- Cool for 30 minutes
- Heat to 650F/343C for 30 minutes
Air Restricted State Restrictions: AK, HI and PR Canada Restricted Hazardous
No products in the cart.