2022-2023 Nissan Pathfinder 8-Inch Touch Screen Digitizer
Replace the damaged touch-sensitive glass while retaining your original LCD, radio, and vehicle functions.
Factory 8-Inch Display Only
This part does not fit the factory 9-inch Pathfinder display. Confirm your original screen size, trim level, connector, and physical appearance before ordering.
A cracked, scratched, shattered, or unresponsive touch screen does not always require replacement of the complete radio assembly. This new replacement digitizer is designed to replace the outer touch-sensitive glass layer while allowing you to reuse your original working LCD and radio electronics.
Restore Touch ControlCorrects touch-related problems caused by a failed or damaged digitizer.Retain Original EquipmentReuse your original LCD, radio electronics, settings, and vehicle functions.Application-Specific FitDesigned for qualifying 2022-2023 Pathfinder models with the factory 8-inch display.
Verified Vehicle Fitment
| Year | Model | Trim | Required Display | Fitment |
|---|---|---|---|---|
| 2022 | Nissan Pathfinder | S, SV | Factory 8-Inch Screen | Fits |
| 2023 | Nissan Pathfinder | S, SV, Rock Creek | Factory 8-Inch Screen | Fits |
| 2022-2023 | Nissan Pathfinder | SL, Platinum | Factory 9-Inch Screen | Does Not Fit |
Compatible with both 2WD and 4WD vehicles when equipped with the qualifying factory 8-inch display. Drivetrain does not determine screen compatibility.
Verify Before Ordering
- Confirm that the vehicle has the factory 8-inch center display.
- Do not order this part for a 9-inch Pathfinder display.
- Compare the ribbon cable, connector, mounting points, and overall shape with the original part.
- Do not rely on GPS or navigation status alone to determine compatibility.
Problems This Part May Correct
- Touch screen does not respond to commands
- Only certain areas respond to touch
- Incorrect or erratic touch response caused by the digitizer
- Cracked or shattered outer touch glass
- Deep scratches or physical damage to the touch surface
This Digitizer Will Not Correct LCD or Radio Problems
Your original LCD must still produce a normal, stable image. This part will not repair:
- Dead or stuck pixels
- Vertical or horizontal lines
- A completely black or blank display
- Incorrect colors, image distortion, or flickering
- Backlight failure or an unusually dim display
- Radio, software, wiring, or head-unit failures
Product Specifications
| Brand | CUESCREENS |
| Part Type | Touch-Screen Glass Digitizer |
| Screen Size | 8 Inch |
| Compatible Radio Model | AIVIL42P0 |
| Condition | New |
| Placement | Center Dash |
| Warranty | 2-Year Limited Warranty |
What Is Included
- One new 8-inch replacement touch-screen glass digitizer
Not included: LCD panel, radio receiver, head unit, bezel, control panel, installation tools, or other components unless specifically shown as included in the product photographs.
Installation Information
This is a component-level repair that requires removal and disassembly of the original display assembly. Professional installation is strongly recommended. Installation damage, cracked glass, torn ribbon cables, damaged connectors, and damage caused by excessive pressure are not manufacturing defects.
Installation Safety
Turn the vehicle completely off and disconnect the negative battery terminal before removing or reconnecting electronic components. Allow retained electrical power to discharge, use appropriate static-control precautions, and avoid working around live circuits or airbag components. Use a qualified automotive electronics installer when you are not comfortable performing the repair.
Important Purchase Notice
This listing is for the replacement touch-screen digitizer only. It is not a complete LCD, radio, navigation system, monitor assembly, or center console. Please verify the 8-inch screen size and compare the original connector and physical configuration with the listing photographs before purchasing.
